Porcelain | High Alumina | Steatite | Cordierite | Mullite | Macor | Zirconia | Ceramic Coating | Silicon Carbide | Titanium Dioxide | ZTA (Zirconia Toughened Alumina)

Lab Porcelainware

Crucible Low Form, galzed inside and out except for outside bottom surface and rim.
Catalog Number Capacity (ml) Height (mm) Top Outside Diameter (mm)
CL-5 5 19 30
CL-10 10 22 35
CL-60 60 38 60
CL-100 100 46 76



Crucible Middle Form, glazed inside and out except for outside bottom surface and rim.
Catalog Number Capacity (ml) Height (mm) Top Outside Diameter (mm)
CM-10 10 26 31
CM-50 50 43 53
CM-80 80 48 60
CM-120 120 56 70


Crucible Tall/High Form, galzed inside and out except for outside bottom surface and rim.
Catalog Number Capacity (ml) Height (mm) Top Outside Diameter (mm)
CT-9 9 29 26
CT-25 25 40 38
CT-55 55 56 45
CT-130 130 75 60
CT-250 250 100 80


Porous, Round in shape and in three sizes. Other sizes &porosities available on special request.
Catalog Number Top Dia. (mm) Capacity (ml) Height (mm)
GC-881 100 175 25
GC-882 125 300 25
GC-883 150 550 25


Evap. Dish, Round Form with lip. High Temp. Export Quality, Glazed inside and outside both side. For bigger Dishes, glazed inside and partially outside.
Catalog No Capacity (ml) Top Outer Diameter (mm) Height (mm)
GC EB-50 22 50 22
GC EB-100 190 105 44
GC EB-150 750 155 66


With lip and flat porcelain handle, glazed inside and out except for rim and top of handle.
Catalog No Top Diameter (mm) Height (mm) Capacity (ml)
GC C-105 40 22 25
GC C-106 70 33 65
GC C-107 85 42 140


WCombustion, glazed/unglazed Max Use Temp. 1150 “C
Catalog No Capacity (ml) Height (mm) Width (mm) Length (mm)
J-801 10 12 80
J-802 11 86
J-803 11 13 90
J-804 11 120


Porous bottom crucible, with porous disc permanently formed into walls. Stable porosity and rate of flow Available with very fine (1.2 micron), fine (S micron) and medium (15 micron) pore dia Discs.
Catalog No Approx. Pore Dia. (mm) Height (mm) Capacity (ml) Top outside diameter (mm)
J-148 1.2 microns 42 25 36
J-149 5.0 microns 42 25 36
J-150 15 microns 42 25 36


Evaporating Basin – (Deep Form)
Evaporating Dish, Round Form with lip. Glazed inside and outside both side. For bigger Dishes, glazed inside and partially outside.
Catalog No Capacity (ml) Top Outer Diameter (mm) Height (mm)
GC EB-50 22 50 22
GC EB-100 190 105 44
GC EB-150 750 155 66


Evaporating Dish, with lip, shallow form, glazed inside except for rim and partially outside.
Catalog No Capacity (ml) Height (mm) Top Outer Diameter (mm)
GC EB-50 20 14 60
GC EB-75 55 20 80
GC EB-100 110 25 102
GC EB-125 250 30 130
GC EB-150 450 40 160


Evaporating Dish, with lip, shallow form, rounded bottom edge, vertical sides, glazed inside and outside except for bottom and rim.
Catalog No Capacity (ml) Height (mm) Top Outer Diameter (mm)
GC EB-675 100 32


Buchner with thick Stem, fixed perforated plate, glazed inside and out except-for rim 
Catalog  Top Dia. (mm) Height  For Filter Paper Use (mm) Approx. Capacity (ml.)
GC BF-758 60 108 50 60
GC BF-759 75 120 70 100
GC BF-760 100 170 90 325
GC BF-761 125 150 200 110 575
GC BF-762 150 200 130 850


BUCHNER FUNNEL Buchner with thin Stem, fixed perforated plate, glazed inside and out except for rim
Catalog No Cup ID (mm) Height (mm) For Filter Paper Use (mm) Approx. Capacity (ml.)
GC EB-35

41

89

35-40

30

GC EB-50

56

110

50-55

80

GC EB-70

77

143

70

186

GC EB-90

97

160

90

320

GC EB-110

112

195

110

550


15. Hirsch, with fixed perforated plate. Glaze except for rim
Catalog No Top Diameter (mm) Height (mm) Approx. Capacity (ml.)
GC HF-780 30 50 10
GC HF-193 42 70 13-15
GC HF-195 50 87 25-30
GC HF-196 78 132 40-47
GC HF-797 94 178 55


Buchner, table type, one piece, with side outlet for vacuum filtration. Glazed inside and out except for rim.
Catalog No Top Diameter (mm) Height (mm) For Filter Paper Use (mm) Approx Capacity (Ltr.)
GC TF-181 145 107 125 1 Ltr.
GC TF-182 220 120 185 2 Ltr.


Catalog No Diameter (mm)
J-398 12.00
J-399 20.23


Silico and Chemico is a prominent manufacturer and exporter of finest quality mortar and pestles. Ever since it’s inception, the main objective of the company has been to make products that can give full satisfaction to its clients. The commitment and dedication Silico has for its clients is commendable and is clearly visible in its product range.


Mortar with lip, glazed outside except bottom and unglazed inside. Pestle unglazed to grinding surface. Pestle oversized for hand comfort in grinding.
Catalog No Mortar Top ID (mm) Mortar Top OD (mm) Capacity (ml) Mortar Height (mm)
GC PM-701 60 80 60 44
GC PM-702 75 90 100 48
GC PM-703 85 105 150 70
GC PM-705 125 155 550 88
GC PM-706 150 180 900 100


Mortar with lip Deep Form Export Quality, glazed outside except bottom and unglazed inside.
Catalog No Mortar Top ID (mm) Mortar Top OD (mm) Capacity (ml) Mortar Height (mm)
GC MD-198 55 70 50 47
GC MD-199 65 80 70 52
GC MD-200 75 90 150 70
GC MD-201 95 115 275 70
GC MD-202 110 130 400 80
GC MD-203 135 165 750 110


Pestle unglazed on grinding surface. Pestle oversized for hand comfort in grinding. (Autoclavable)
Catalog No For Mortar Catalog No Pestle Length (mm)
GC P-206 114
GC P-207 130
GC P-208 157
GC P-209 180
GC P-210 194


Pestle has porcelain grinding head and wooden handle. (Handle is not autoclavable)
Catalog No For Mortar Catalog No Mortar Top Inside Diameter (mm)
GC PH-735 60
GC PH-736 75
GC PH-738/215 100
GC PH-739 130
GC PH-740 150
GC PH-742/217 200
GC PH-743 250


Mortar with lip, outside 7 inside glazed except bottom.pestle fully glazed 7 oversized for hand comfort in grinding. ( Note: The same sizes are also available with inside unglazed grinding surface with pestle grinding surface unglazed.
Catalog No MortarTop OD(mm) Height(mm) Capacity(ml) Pestle length(mm)
GC MG-60 60 32 25 52
GC MG-80 81 42 50 84
GC MG-100 100 50 110 103
GC MG-163 163 82 500 175


Color/SpottingPlate
Catalog No Length (mm) Width (mm) No. of Depressions
GC CP-820

94

62

6

GC CP-221

115

88

12


Streak, unglazed. as used for arsenic test and by mineralogists.
Catalog No Length (mm) Width (mm) No. of Depressions
GC CP-224

65

50


Glazed, spoon on one end, spatula on other.
Catalog No Lenght (mm) Capacity (mm)
J-228 165 0.5
J-229 198 1.2
J-230 260 5.5


Glazed, long spatula onone end, knob on other.
Catalog No Length (mm)
J-225 205


Catalog No Length (mm)
GC S-105 105
GC S-130 130
GC S-160 160
GC S-200 200


With thick or thin wires, pipes unglazed
Catalog No. Size (mm)
GC T-884 50
GC T-885 60
GC T-886 75


All glazed, bottom unglazed
Catalog No. Size (mm)
GC  PT-884 50
GC  PT-885 60
GC  PT-886 75


All glazed except bottom and top rim.
Catalog No. Top Diameter (mm) Height (mm) Hole Diameter (mm)
GC BS-651 60 30 15
GC BS-652 75 38 16
GC- BS-653 85 50 16
GC BS-654 100 60 22


Dessicator, glazed on top surface
Catalog No Diameter (mm) No. of Holes Diameter of Holes (mm)
GC DP-901 230 8 30


Dessicator, with numerous small perforations, large hole in center, glazed on one side.
Catalog Number Diameter (mm) Diameter of Center Hole (mm) Diameter of Holes (mm)
GC DP-90 90 100 5
GC DP-140 140 150 5
GC DP-190 190 200 5


Dessicator, glazed on top surface
Catalog No Diameter (mm) No of Holes Diameter of Big Hole (mm) Diameter of Small Holes (mm)
GC DP-931 95 3 25
GC DP-933 140 6 35
GC DP-935 190 8 50 35


Dessicator, on three feet, 16 mm High, glazed on top surface
Catalog No Diameter (mm) No. of Holes Diameter of Holes (mm)
GC DP-153 95 3 30
GC DP-154 115 4 30
GC DP-155 142 5 30
GC DP-157 190 7 30


Round Form, all glazed except bottom Oval Shape is also available
Catalog No. Top Diameter (mm) Height (mm) Capacity (mm)
GC-1111 83 41 100


(Flat & conical in shape)
Cat. # j-810 & j-811 are in flat shape and j-812 is conical shape
Catalog Number Capacity (ml) Top Dia. (mm) Height (mm)
GC DP-810 600 105 150
GC DP-811 1000
GC DP-812 500 10 143


Plain, all glazed except bottom.
Catalog Number Length (mm) Width (mm) Height (mm)

GC- T809

300

250

50


(NOSE WASH POT)

All glazed except bottom, available in two shapes and used for washing nose.

Catalog Number Capacity (ml) Length (mm) Height (mm)
GC-1071 100 160 50
GC-1072 100 158 45
GC-1073 185 167 46

Dr. Nelson’s Type
With / Without Cork and Tube, all glazed except bottom
Catalog Number Capacity (ml) Top Dia. (mm) Height (mm) Cork & Tube
GC-1038 500 52 143 NO
GC-1039 750 52 147 NO
GC-1040 500 52 143 YES
GC-1041 750 52 147 YES


All glazed except bottom.
Catalog Number Capacity (ml) Capacity (OZ)
GC FC-1051 250 8
GC FC-1052 210 7
GC FC-1053 180 6
(Cylindrical & spherical form)
All glazed except bottom and inside unglazed for effective grinding.
Catalog Number Capacity (ml) Capacity (OZ)
GC PM-2 Cylindrical 2
GC PM-7 Cylindrical 7
GC PM-10 Cylindrical 10


Porous, cylindrical in shape and in three sizes. Other size & porosities available on special request.
Catalog Number  Diameter (mm) Height (mm)
GC-784 50 150
GC-785 60 150
GC-786 75 150



Alumina porcelain QUALITY
Product code Gc-30 Gc- 30+ Gc-50 Gc-50+
FEATURE OF COMPOSITION AI2O3 < 30% AI2O3 > 30% AI2O3  < 50% AI2O3  > 50 %
APPLICATION RANGE L.V. and H.V.
insulation , good mechanical properties, suited for small middle and large-sized insulators.
suitable for complicated pressed pieces & Resistors and rheostats. Chemical porcelain ,H.V. insulation, high mechanical strength, good thermal shock resistance.  excellent mechanical ,wear and thermal properties,
PROPERTIES
COLOUR White Special 
Purpose 
White
White Grey White / Grey
POROSITY (Vol. %) 0 0 0 0 0
BULK DENSITY (g/cm2) 2.30 2.40 2.50 2.50 2.70
HARDNESS (Mohs Scale) 7 to 8 7 to 8 7 to 8 7 to 8 7 to 8
  FLEXURAL
  STRENGTH
(N/mm2)
  Unglazed 60 40 100 100 140
  Glazed 70 50 120 120 160
           
THERMAL
EXPANSION
LINER
COEFFICENT
(10-6 K-1)
a20 – 1000c 4.15 4.15 4.90 4.90 5.60
a20 – 3000c 4.50 3.90 4.75 4.75 5.35
a20 – 6000c 4.55 4.60 5.95 5.95 6.45
           
THERMAL SHOCK RESISTANCEMIN. (K) 150 150 150 150 150
           
THERMAL CONDUCTIVITY (20-100C) 2.0 2.0 2.5 2.5 2.8
   VOLUME
   RESISTIVITY
   IN TERMS OF
   TEMPERATUR
   E (D.C.)cm
q 1013 1012 1013 1013 1013
2000C 108 108 108 108 108
6000C 104 104 104 104 104