Steatite Interlocking Beads
| Code no. | DIAMETER IN M.M. | QUANTITY (APR.) | TO TAKE | ||||
| I.D. Ø | O.D. Ø | PER FOOT |
PER KG. |
WIRE GAUGE |
WIRE SIZE IN M.M. |
||
| BIDL30001 | SCS/1 | 1.4 | 3.3 | 90 | 18000 | 18 | 1.22 |
| BIDL30002 | SCS/2 | 1.8 | 4.2 | 70 | 9500 | 16 | 1.63 |
| BIDL30005 | SCS/5 | 3.2 | 8.5 | 40 | 1200 | 11 | 2.95 |
| BIDL30006 | SCS/6 | 4.0 | 10.0 | 35 | 800 | 9 | 3.66 |
| BIDL30008 | SCS/8 | 5.5 | 12.7 | 25 | 400 | 6 | 4.88 |
| BIDL30009 | SCS/9 | 6.0 | 13.0 | 20 | 350 | 4 | 5.89 |
Steatite Band Heater (Regular)
TOLERANCES FOR WIDTH AND HEIGHT ±0.3 MM, OR 2% WHICHEVER IS GREATER
TOLERANCES FOR LENGTH ±0.30 MM FOR ALL
TOLERANCES FOR HOLES AND SLOTS ±0.15MM
BOW ALLOWANCES 0.15MM OR 0.5% OF THE LENGTH
| DIMENSION | A SIZE | |
| H | 13.7 | |
| W | 9.0 | |
| ØD | 4.75 | |
| S | 1.7 |
Steatite-cartridge-heater
| PRODUCT. | O.D. | I.D. | H | H1 | H2 | O.D.1 | P.C.D. | |
| 8.00 | 1.60 | 4.00 | 2.00 | 2.00 | 6.50 | 2.80 | ||
| 10.00 | 2.50 | 6.00 | 3.00 | 3.00 | 8.00 | 3.70 | ||
| 8.00 | 1.60 | 8.00 | 4.00 | 4.00 | 6.50 | 2.80 | ||
| 10.00 | 2.50 | 12.00 | 6.00 | 6.00 | 8.00 | 3.70 | ||
| 14.00 | 3.60 | 12.00 | 6.00 | 6.00 | 12.00 | 5.00 | ||
| 16.00 | 4.20 | 10.00 | 5.00 | 5.00 | 14.50 | 7.00 | ||
| 10.00 | 2.50 | 9.00 | 5.00 | 4.00 | 8.00 | 3.50 | ||
| 12.50 | 2.50 | 9.00 | 5.00 | 4.00 | 10.40 | 4.50 | ||
| 17.00 | 3.50 | 12.00 | 5.00 | 7.00 | 14.00 | 8.00 | ||
| 19.90 | 4.20 | 12.00 | 5.00 | 7.00 | 17.90 | 9.80 | ||
| 25.80 | 4.30 | 12.00 | 5.00 | 7.00 | 22.50 | 11.50 |
NOTE :
DIMENSIONAL TOLERANCE: UP TO 5MM : ±0.15
FROM 5 TO 10MM : ±0.20
OVER 10 MM : ±2%
* * DETAILED DRAWING AVAILABLE ON REQUEST.
Steatite Capacitor Bush & Gromet
| CAPACITOR BUSH TOP | ||||||||
| PRODUCT | A | B | C | D | E | F | G | WEIGHT IN GRM |
| 19.7 | 10.4 | 12.0 | 5.7 | 17.0 | 4.7 | 3.9 | 7.7 | |
| 31.3 | 21.2 | 13.8 | 8.2 | 28.7 | 8.5 | 4.8 | 28.6 | |
| 39.8 | 23.5 | 18.0 | 10.5 | 27.0 | 2.7 | 8.0 | 49.5 | |
| CAPACITOR BUSH BOTTOM | ||||||
| PRODUCT | A | B | C | D | E | WEIGHT IN GRM |
| 20.0 | 6.0 | 10.2 | 6.0 | 9.5 | 5 | |
| 32.2 | 8.3 | 20.0 | 8.5 | 13.5 | 20.5 | |
| 38.7 | 10.5 | 19.2 | 8.3 | 14.8 | 29 | |
| PRODUCT | d1 | d2 | d3 | d4 | I1 | I2 | I3 | I4 | WEIGHT IN GRM |
| 15.00 | 12.00 | 10.00 | 7.00 | 8.00 | 5.50 | 3.00 | 2.00 | 2 | |
| 25.00 | 18.00 | 16.50 | 13.00 | 12.00 | 8.00 | 2.25 | 2.00 | 6 | |
| 32.00 | 26.00 | 24.00 | 20.00 | 14.00 | 9.00 | 4.50 | 2.00 | 11 |
Formers (Resistance)
| TYPE | L | O.D. Ø | O.D.1 Ø | I.D. Ø | WEIGHT IN GRM |
| A | 190.00 | 38.00 | 28.00 | 10.00 | 300 |
| B | 365.00 | 44.00 | 38.00 | 22.00 | 615 |
| C | 250.00 | 15.00 | 14.50 | 6.50 | 54 |
| PRODUCT | L | W | H | h1 | h2 | S | R1 | R2 | C/C | TEETH | WEIGHT IN GRM |
| 86.50 | 25.40 | 27.36 | 21.00 | 8.50 | 2.39 | 12.70 | 15.87 | 6.20 | 14 NOS. | 105 | |
| 86.50 | 25.40 | 27.36 | 21.00 | 8.50 | 2.39 | 12.70 | 15.87 | 10.90 | 08 NOS. | 110 |
| PRODUCT CODE | L | l1 | l2 | h1 | h2 | S | R1 | R2 | TEETH | WEIGHT IN GRM |
| 86.50 | 2.50 | 6.17 | 5.00 | 12.50 | 2.80 | 12.50 | 16.00 | 14 NOS. | 92 | |
| 86.50 | 5.00 | 12.36 | 5.00 | 12.50 | 2.80 | 12.50 | 16.00 | 07 NOS. | 89.5 | |
| PRODUCT CODE | L | W | H | h1 | h2 | h3 | S | C/C | TEETH | WEIGHT IN GRM |
| 71.50 | 25.50 | 18.50 | 13.50 | 11.30 | 7.00 | 4.40 | 12.00 | 06 NOS. | 55 | |
| 71.50 | 25.50 | 18.50 | 13.50 | 11.30 | 7.00 | 4.40 | 9.00 | 08 NOS. | 55.5 | |
| 71.50 | 25.50 | 18.50 | 13.50 | 11.30 | 7.00 | 4.40 | 6.60 | 11 NOS. | 54 |
| ITEM | CODE | L | W | H | h1 | h2 | C/C | TEETH | WEIGHT IN GRM. |
| RECTANGLE FORMER | GENCP0344 | 74.50 | 47.50 | 21.50 | 17.50 | 5.50 | 9.40 | 8 NOS. | 110 |
| RECTANGLE FORMER | GENCP0345 | 74.50 | 47.50 | 21.50 | 17.50 | 5.50 | 7.75 | 10 NOS. | 111 |
| RECTANGLE FORMER | GENCP0346 | 74.50 | 47.50 | 21.50 | 17.50 | 5.50 | 6.80 | 11 NOS. | 113.5 |
Din Type Steatite Ceramic HRC Fuse Body
| CURRENTRATING | PRESSURE BURSTINGSTRENGTH | L | B1 | B2 | C1 | C2 | THREADS | WEIGHT | |
| 60-100 A, 500 V | 400 PSI [28 kg/cm²] | 44 | 40 | 20.5 | 32 | 13 | B2.8 X 13 DIN 7970 | 58.5 grm | |
| PATTERN NO. | CURRENTRATING | PRESSURE BURSTINGSTRENGTH | L | B1 | B2 | C1 | C2 | THREADS | WEIGHT |
| 60-100 A, 500 V | 400 PSI [28 kg/cm²] | 42.7 | 47 | 29 | 38 | 17 | B2.8 X 8 DIN 7970 | 92 grm | |
| 60-100 A, 500 V | 630 PSI [44 kg/cm²] | 60.5 | 52 | 39 | 41 | 29 | B3.5 X 8 DIN 7970 | 172 grm |
| PATTERN NO. | CURRENTRATING | PRESSURE BURSTINGSTRENGTH | L | B1 | B2 | C1 | C2 | THREADS | WEIGHT |
| 60-100 A, 500 V | 630 PSI [44 kg/cm²] | 60 | 60 | 63 | 48 | 41 | B3.5 X 8 DIN 7970 | 257 grm |
| PRODUCT CODE. | CURRENTRATING | PRESSURE BURSTINGSTRENGTH | L | B1 | B2 | C1 | C2 | THREADS | WEIGHT |
| 60-100 A, 500 V | 400 PSI [28 kg/cm²] | 45 | 43 | 29.5 | 32 | 18 | B3.5 X 16 DIN 7970 | 94 grm |
Round Barrel
|
PROCUCT CODE. |
ITEM | ØA ±0.05 | ØB ±0.50 | L ±0.50 | D x 45° CHA. | WEIGHT IN GRM. |
| 15 AMP | 12.17 | 6.40 | 28.50 | 1.00 | 5.4 | |
| 30 AMP | 20.04 | 10.70 | 48.00 | 1.00 | 25.3 | |
| 60 AMP | 24.00 | 14.00 | 49.00 | 1.00 | 34.2 | |
| 100 AMP | 22.00 | 12.30 | 48.00 | 1.00 | 29 | |
| 200 AMP | 30.04 | 17.40 | 54.00 | 2.00 | 60 | |
| T1 | 13.40 | 8.00 | 49.70 | 1.50 | 10.5 | |
| T2 | 21.10 | 14.00 | 55.80 | 1.50 | 27 | |
| 14 x 51 | 12.70 | 6.50 | 48.00 | 1.00 | 11 | |
| 22 x 58 | 20.40 | 12.80 | 53.50 | 2.00 | 24.7 | |
| 10 x 38 | 9.60 | 5.00 | 37.00 | 1.00 | 5 | |
| 14 x 51 SPECIAL |
12.70 | 8.50 | 48.70 | 1.50 | 8.5 |
Note:
- ALL DIMENSIONS ARE IN M.M
- BURSTING STRENGTH: 60 KG / CM²
- BREAKING STRENGTH: 100 KG / CM²
- DETAILED DRAWING AVAILABLE ON REQUEST.
Steatite Ceramic Bush MALE & FEMALE
| CERAMIC BUSH MALE | |||||||||
| PROCUCT CODE | A | B | C | D | H | H1 | H2 | H3 | WEIGHT IN GRM |
| 30.00 | 22.00 | 13.00 | 21.00 | 23.00 | 15.00 | 8.00 | 7.00 | 24 | |
| 33.00 | 19.00 | 10.50 | 18.50 | 23.80 | 16.00 | 7.80 | 8.00 | 30 | |
| 40.00 | 27.50 | 16.90 | 25.80 | 33.00 | 21.00 | 12.00 | 12.00 | 55 | |
| 41.00 | 24.50 | 12.80 | 23.00 | 29.00 | 20.00 | 9.00 | 10.00 | 61 | |
| 36.00 | 19.00 | 10.50 | 18.50 | 23.80 | 16.00 | 7.80 | 8.00 | 38.5 | |
M.H.B. [ MOSQUITO HOUSING BOATS]
| CODE NO. | L | W | H | MATERIAL |
| MHBL50007 | 37.00 | 23.20 | 8.00 | C-221 |
| CODE NO. | L | W | H | MATERIAL |
| MHBL30008 | 40.00 | 28.00 | 11.00 | C-220 |
| PRODUCT CODE . | L | W | H | MATERIAL |
| 32.25 | 25.10 | 12.50 | C-221 |
Ceramic Plate (M.C.B.)
| ART | PRODUCT CODE. | L | W | Thik | L1 | WT |
 |
28.00 | 16.60 | 2.00 | 24.50 | 1.8 | |
 |
26.60 | 17.00 | 2.00 | – | 1.6 | |
 |
28.50 | 17.00 | 1.70 | 24.50 | 1.2 | |
 |
28.00 | 17.80 | 1.60 | – | 1.2 | |
 |
28.30 | 17.00 | 2.00 | 24.50 | 1.8 | |
 |
MCBL30034 | 28.00 | 16.00 | 2.00 | 24.50 | 1.8 |
Grinding Media & Lining Bricks
Grinding Media
| Item | ØD | weight in grm. | |
| BallØ10.00 | 10.00 | 1.3 | |
| BallØ20.00 | 20.00 | 10 | |
| BallØ40.00 | 40.00 | – | |
| BallØ50.00 | 50.00 | 190 | |
| BallØ60.00 | 60.00 | 315 |
Advanced steatite Grinding Media And Linrs
| Lining Bricks | ||||
| Taper | W1 | W2 | H | L |
| 150-50 | 56 | 50 | 50 | 150 |
| 115-50 | 56 | 50 | 50 | 115 |
| 75-50 | 56 | 50 | 50 | 75 |
| 35-50 | 56 | 50 | 50 | 35 |
Material Specification
| Material Properties |
Unit | Normal Porcelain |
Dense Cordierite |
Steatite Grade L-3 |
Steatite Grade L-5 |
Cordierite Porcelain |
Cordio-Sillmanite Refactory |
Cordierite Refractory |
High Alumina Porcelain |
Alumina Ceramic |
| Equivelent to DIN EN 60672 |
C-112 | C-210 | C-220 | C-221 | C-410 | C-510 | C-511 | C-610 | C-780 | |
| PHYSICAL PROPERTIES |
||||||||||
| Colour | Cream/ White/ Grey | Off -White | Off White | Off -White satin smooth | White | White/ Buff | Brown | Off .White | Brown | |
| Specific Geavity |
2.3 | 2.2 | 2.6 | 2.7 | 2.3 | 1.8-1.9 | 1.9 | 2.6 | 3.2 | |
| Water Absorbtion |
% | Less than 1 | Less than 2% | 0.5 | 0 | 0 | 22-24 | 15-20 | 0 | 0 |
| Flexural Strength |
kg /cm 2 | 800 | – | 1200 | 1400 | 800 | 300 | 300 | 1200 | 2500 |
| Compressive Strength |
kg /cm2 | 2500 | 2500 | 4000 | 5000 | 2500 | 800 | 2000 | 3500 | 16000 |
| Young’s Modulus |
kg/cm2X106 | 0.7 | – | 0.8 | 1 | 0.75 | – | – | 1 | 2 |
| Hardness | Moh’s Scale | 6-6.5 | – | 6–7 | 6–7 | 6-6.5 | 7–8 | – | 7 | 8 |
| THERMAL PROPERTIES |
||||||||||
| Co-officent of Thermal Expantion (30-600 degree Celsius) | x 10-6 / ° C | 6–7 | 4–5 | 6–7 | 6–7 | 6–7 | 4–5 | 4–5 | 5–6 | 6–8 |
| Thermal Shock Resistance Down Shock | ° C | |||||||||
| Thermal Conductivity |
W/M ° K | 1.4-2.5 | – | 2–3 | 2–3 | 1.2-2.5 | 1.3-1.8 | 1.3-1.8 | 2–6 | 10–16 |
| Safe Operation Temp. |
° C | 600 | 1000 | 1000 | 1050 | 600 | 1300 | 1000 | 1000 | 1100 |
| Max.Temp. Withstanding Capacity |
° C | 1200 | 1200 | 1200 | 1200 | 1200 | 1350 | 1200 | 1200 | 1200 |
|
ELECTRICAL |
||||||||||
| Dielectric Strenghth (20 ° C ) |
KV/mm | 8 | – | 10 | 20 | 10 | – | – | 10 | 18 |
| Dielectric Constant (20 ° C::1MHz ) |
5 | – | 5.5 | 6.5 | 6 | – | – | 7 | 8 | |
| Volume Resistivity (20° C) |
Ohm-cm | 10 11 | – | 10 11 | 10 11 | 10 10 | – | – | 10 11 | 10 12 |
| CHEMICAL COMPOSITION N.P. |
||||||||||
| SiO2 | % | 70 | 70-75 | 60-65 | 60-65 | 70-72 | 45-50 | 55-57 | 40-45 | – |
| AI2 O3 | % | 20 | 15-17 | 15-17 | 6–7 | 23-25 | 45-50 | 30-32 | 45-50 | app.80 |
| Mg o | % | – | 10–12 | 18–20 | 25-27 | 1–3 | 1–2 | 7–8 | – | – |
| APPLICATION | ||||||||||
| LT Insulator, Lamp, Holder, Media Lining Block etc. | Ferrules High heart Shock Items. | MCB Plates Beads, Insulators, Lamp Holders. | HRC Sq.Bodies, Band Heaters , End Seabush Griding Media, Liners. | HRC Round Bodies, Wire Wound, Resistor, Tube Different Special Shop Insulators, Media. |
Klin Furniture Hot plates, Heating Element Support. | Bobbins, Multi Hole, Tubes Heating Element Support. | High/Low Voltage Electrical Application Resistance Formers | Coil Formers, Wear Resistant Parts. |