Wear Resistant Poly Ceramics Coates
SURFACE RENEWAL PRODECTS by GROCERA
1-GROCERA POLY CERAMIC COMPOUND
INTRODUCTION:
Ceramic compounds are advanced composites formulated to withstand cavitation, abrasion, corrosion. This is a two part system containing hard ceramic particles of predetermined size and shape to ensure long lasting surface protection.
FEATURE & BENEFITS:
- Ceramic filled and fibred reinforced.
- Superior adhesion to almost all clean surface.
- Protection against corrosion, cavitations, abrasion.
- Easy to use and fast to cure.
- Room temperature application.
APPLICATION AREA:
Chemicals Pump, Pulp seperator, Impeller, Pump Casing, Heat Exchangers, Screw
conveyor etc. to name few. Where the abrasion due to flow of particle Size more than 1mm exist.
conveyor etc. to name few. Where the abrasion due to flow of particle Size more than 1mm exist.
PHYSICAL PROPERTIES:
| Compressive strength | : | 950kg/cm2 |
| lexural strength | : | 550kg/cm2 |
| Tensile shear strength | : | 180kg/cm2 |
| Maximum Operating Temperature | : | 230deg.C |
| Working time at 30deg.C | : | 25 to 30 minutes. |
| Cure time at 30deg. C | : | 3 to 4 hours. |
| Mix Ratio | : | 2R:1H |
| Kit size | : | 1kg./5kg./10kg. |
| Coverage | : | 6.5kg/m 2 with 3mm coating. |
2-GROCERA POLY CERAMIC LIQUID
INTRODUCTION:
Ceramic liquid are advanced composites formulated to withstand cavitations,abrasion, corrosion. This is a two part system containing hard ceramic particles of predetermined size and shape to ensure long lasting surface protection.
FEATURE & BENEFITS:
- Ceramic filled and fibred reinforced.
- Superior adhesion to almost all clean surface.
- Protection against corrosion, cavitations, abrasion.
- Easy to use and fast to cure.
- Room temperature application.
APPLICATION AREA:
Chemicals Pump, Pulp seperator, Impeller, Pump Casing, Heat Exchangers, Etc. and as super coating on Grocoat wr poly ceramic compound to attain smooth finish.
PHYSICAL PROPERTIES:
| Compressive strength | : | 950kg/cm2 |
| lexural strength | : | 550kg/cm2 |
| Tensile shear strength | : | 170kg/cm2 |
| Maximum Operating Temperature | : | 210deg.C |
| Working time at 30deg.C | : | 30 to 40 minutes. |
| Cure time at 30deg. C | : | 4 hours. |
| Mix Ratio | : | 3R:1H by weight |
| Kit size | : | 1kg./5kg./10kg |
| Coverage | : | 1kg/m 2 with 0.5mm thickness. |